Disconnecting A Cell Phone; Registering Phone Number In The Phonebook - Eclipse CD3200 Owner's Manual

Press the [SELECT] (Up/Down)
3
button to select the cell phone to
be connected.
Press the [ENTER] button.
4
Press the [SELECT] (Up/Down)
5
button to select Connect.
Press the [ENTER] button.
6
The "Waiting" message appears on
the display.
"COMPLETED" will be displayed.
7
The cell phone is now connected to
the main unit.
( and appear on the display.)
"FAILED" will
registration is not successful. Repeat
the connection procedure.
ATTENTION
Cell phones that have not been registered
cannot be connected.

Disconnecting a cell phone

Press the [SELECT] (Up/Down)
button while in the Phone Setting
1
selection mode to select Select
Phone.
Press the [ENTER] button.
2
Press the [SELECT] (Up/Down)
3
button to select the cell phone to
be disconnected.
Press the [ENTER] button.
4
be displayed if
The Bluetooth hands-free function
Press the [SELECT] (Up/Down)
5
button to select Disconnect.
Press the [ENTER] button.
6
The "Disconnect ?" message appears
on the display
disconnection.
Press the [ENTER] button.
7
"COMPLETED" will be displayed
8
when disconnection is successful.
Registering phone number in the
phonebook
Phone numbers can be registered in the
phonebook of the main unit by transferring the
phonebook data from the cell phone.
A maximum of 500 phone numbers can be
registered for each cell phone.
Press the [SELECT] (Up/Down)
button while in the Phone Setting
1
selection mode to select
Phonebook.
Press the [ENTER] button.
2
The "DATA
appears on the display.
Transmit phonebook data using
3
your cell phone.
"COMPLETED" will be displayed
4
when data transfer is successful.
"FAILED" will be displayed if data
transfer is not successful. Repeat the
transmit procedure.
to confirm the
Receiving" message
IX
55