Making Changes With Function Mode; Switching The Function Mode; Setting A Station Name/Disc Title - Eclipse CD3200 Owner's Manual

Various Settings

Making changes with Function Mode

Various Settings
A variety of settings can be changed.

Switching the Function Mode

Press the [ /MENU] button for
1
more than one second.
The Menu selection mode is activated.
Press the [SELECT] (Up/Down)
2
button to select FUNC, and then
press the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Up/Down)
3
button to select a setting item.
When the button is pressed, the
setting item changes in the following
order.
STATION NAME
GUIDE TONE ↔ Clock ON/OFF ↔
Clock Adjust ↔ Demo ↔ HD RADIO
↔ AUX ON/ OFF
Steering SW ↔ SIRIUS ID
↔ Phone Setting
*1: Cannot make settings other than
for tuner operation.
*2: Cannot make settings other than
for CD/CD changer operation.
*3: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. (Refer to page
86 for details on HD Radio
operation.)
*4: Refer to page 101 for detail on
AUX operation.
*5: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 94 for details on
SIRIUS Satellite radio operation.)
76
*1 *2
↔ DISC TITLE ↔
*3
*4 *4
↔ AUX Sens ↔
*5 *6
↔ XM ID
*7 *8
↔ BT Audio Set
*6: This setting can only be chosen
when an optional XM Satellite
radio tuner unit is connected.
(Refer to page 90 for details on XM
Satellite radio operation.)
*7: For details, refer to "Setting the
Bluetooth hands-free function" on
page 52.
*8: For details, refer to "Bluetooth
audio setup" on page 38.

Setting a station name/disc title

The name of the station being received, or the
title of the CD being played can be set.
ATTENTION
Not available with HD-Radio or SAT radio.
Press the [SELECT] (Up/Down)
1
button to select Station Name or
Title.
Station Name or Title will be selected
based on the current audio mode
settings.
2
Press the [ENTER] button.
The title setting mode is activated.
Press the [SCREEN/TEXT] button
3
to select the character type.
Pressing the button will switch types
from [ABC]
characters)
characters) and then [!"#] (symbols).
(upper-case alphabet
to, [123] (numeric