1. Manuals
  2. Brands
  3. Eclipse Manuals
  4. Car Stereo System
  5. CD5423
  6. Owner's manual

Eclipse CD5423 Owner's Manual

Eclipse - fujitsu ten cd receiver with multi control owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

CD5423
MODEL
ESN E5 High-Power CD Receiver with
Multi Control
OWNER'S MANUAL
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD5423 and is the answer not in the manual?

Questions and answers

Related Manuals for Eclipse CD5423

Summary of Contents for Eclipse CD5423

  • Page 1 CD5423 MODEL ESN E5 High-Power CD Receiver with Multi Control OWNER'S MANUAL We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
  • Page 2 CD5423 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD5423. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
  • Page 3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. •...
  • Page 4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems.
  • Page 5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock.
  • Page 6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire. •...

  • Page 7: Table Of Contents

    Table of Contents Operating precautions...10 Notes on operation ...10 About compact discs ...11 About cleaning a CD ...13 Names of controls and parts ...14 ESN (Key CD) security operating procedure ...15 How to program the Key CD ...15 How to cancel the Key CD ...16 How to change the Key CD ...17 How to resume normal operation (ESN security lock out)...17 What happens if an incorrect CD is inserted? ...18...
  • Page 8 How to operate the MP3 player ...43 About MP3...43 Listening to MP3 file ...46 Advancing to the next track (file) or returning to the beginning of the track (file) being played ...47 Skipping to the next or previous folder ...47 Return to the root directory of the CD ...47 Playing the beginning of files (SCAN) ...48 Repeating the same file (REPEAT)...48...
  • Page 9 How to operate the receiver with an optional CD changer connected...70 Listening to a CD...70 Advancing to the next track or returning to the beginning of the track being played ...70 Fast Forward/Rewind ...70 Playing the beginning of tracks (SCAN) ...71 Repeating the same track (REPEAT)...71 Playing tracks in random order (RANDOM) ...72 Skipping to the next or previous CD...72...

  • Page 10: Operating Precautions

    Operating precautions Operating precautions <Your CD5423 will perform well over a long period of time through correct handling and care.> Notes on operation • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left.

  • Page 11: About Compact Discs

    About compact discs • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
  • Page 12 Operating precautions About brand new CDs • You may notice that some brand new discs are rough around the center hole or outside edge. Remove the rough edges with the side of a ballpoint pen, etc. Rough edges may prevent proper loading in the deck.

  • Page 13: About Cleaning A Cd

    About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.

  • Page 14: Names Of Controls And Parts

    Names of controls and parts Names of controls and parts Front view ①② ③ ④ ⑭ ⑬⑫ With the front open Never place an object or rest your hands or the like on the front panel. Caution [DISC] button [E-COM] button* [OPEN] button Buttons [1] to [6] [SOUND] button...

  • Page 15: Esn (Key Cd) Security Operating Procedure

    A [SEC] message appears, then in two seconds it will change to [DISC]. The front panel opens; the CD5423 is now ready to accept your Key CD in the CD slot. Insert the CD into the slot.

  • Page 16: How To Cancel The Key Cd

    A [SEC] message appears, then in two seconds it will change to [DISC]. The front panel opens; the CD5423 is now ready to accept your Key CD in the CD slot. Insert your Key CD into the slot.

  • Page 17: How To Change The Key Cd

    When the power is turned on after disconnecting the battery power, a [SEC] message will appear for two seconds. Thereafter, the message changes to [DISC] and the CD5423 is ready to accept your Key CD into the slot. Insert your Key CD.

  • Page 18: What Happens If An Incorrect Cd Is Inserted

    ESN (Key CD) security operating procedure What happens if an incorrect CD is inserted? An [ERR] message will be appear, then change to a flashing [DISC], then the CD will be ejected. You will have five uninterrupted attempts to insert the correct After the 5th incorrect attempt, the display reads [HELP].

  • Page 19: How To Turn The Security Indicator On/Off

    [ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN). You may use this number to identify your Eclipse CD5423 in the event it is recovered after being stolen. ESN (Key CD) security operating procedure...

  • Page 20: Basic Operation

    Basic operation Basic operation [PWR] button This section covers basic operating procedures. For additional details, please refer to the sections on specific functions. Turning the power on and off Turning the power on and off. When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored.

  • Page 21: Listening To A Cd

    [OPEN] button [DISC] button Listening to a CD Press the [OPEN] button. The front panel opens. Insert a CD into the disc slot, label side up. The CD will immediately start playing. When a CD is already loaded, press the [DISC] button to switch to the CD mode.

  • Page 22: Listening To The Tuner

    Basic operation [FM AM] button Listening to the tuner Press the [FM AM] button. This will turn the tuner on. Press the [FM AM] button to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

  • Page 23: Adjusting Audio Volume

    [E-COM] button [AUDIO CONTROL] button Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Increases the volume. Turn to the left: Decreases the volume. Press the [E-COM] button for more than one second if E-COM is connected and less than one second if E-COM is not connected ATTENTION to cut the volume or restore it instantly.

  • Page 24: Switching Audio Control Modes

    Basic operation [AUDIO CONTROL] button Switching audio control modes Various audio control modes may be fine-tuned using this procedure. Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted. Modes will switch in the order shown below each time the button is pressed.

  • Page 25: Bal (Balance) Mode

    [AUDIO CONTROL] button BAL (BALANCE) Mode Adjusts left/right speaker balance. Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes right speakers. Turn to the left: FAD (FADER) Mode Adjusts front/rear speaker balance. Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes front speakers.

  • Page 26: Making Changes With Display Adjustment Mode

    Basic operation Making changes with Display Adjustment Mode This function allows adjustment of display contrast and changing illumination colors. Press the [DISP] button. Enters Display Adjustment Mode. Contrast adjustment Adjust the display contrast to the best level in accordance with the angle of viewing.

  • Page 27: Making Changes With Function Mode

    Making changes with Function Mode A variety of settings can be changed. Press the [FUNC] button. The function mode is activated. Turn [SEL] button in either direction to display setting items for selection. Setting items will be displayed in the following order when the [SEL] button is turned to the right.

  • Page 28: Clock Display On/Off

    Basic operation Disabling the guide tone feature (for button operation) The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: Turn [SEL] button to select GUIDE TONE. Press the [SEL] button.

  • Page 29: Setting The Time

    [FUNC] button Setting the Time This receiver uses the 12-hour display notation. Turn [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected for adjustment.

  • Page 30: Making Changes With Sound Adjustment Mode

    Basic operation Making changes with Sound Adjustment Mode Used to adjust acoustic feature in the vehicle. Press the [SOUND] button. The sound adjustment mode is activated. Turn [SEL] button in either direction to display setting items for selection. Setting items will be displayed in the following order when the [SEL] button is turned to the right.

  • Page 31: Disabling The Cross Over (F,R) Function

    SETTING BASS/TREBLE These modes adjust bass (low sounds) and treble (high sounds). Turn [SEL] button to select BASS/TREB. Press the [SEL] button. The BASS/TREB setting mode is activated. Turn [SEL] button to select BASS/TREB. Press the [SEL] button. The frequency selection mode is activated. Turn [SEL] button to display the frequency to be selected.

  • Page 32: Disabling The Cross Over (Nf) Function

    Basic operation Disabling the Cross Over (NF) function Here, the LPF (low-pass filter) to the non-fader pre-out can be switched ON and OFF. Since the low-pass filter passes only lower ranges (higher ranges are cut off), efficient playback is enabled by cutting off mid to higher range elements not needed for a woofer.

  • Page 33: Others

    [E-COM] button [OPEN] button Others Enabling E-COM feature Press the [E-COM] button for one second. Pressing the button will switch the E-COM feature on or off. Adjustment of the front panel angle Press and hold the [OPEN] button for more than one second.

  • Page 34: How To Operate The Cd Player

    How to operate the CD player How to operate the CD player [DISC] button First press the [DISC] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. Listening to CDs Press the [DISC] button.

  • Page 35: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    Advancing to the next track or returning to the beginning of the track being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track. Turn to the left: Fast Forward/Rewind Fast forward or rewind the song currently being played. Press and hold the [SEEK ] or [FAST ] button.

  • Page 36: Repeating The Same Track (Repeat)

    How to operate the CD player Repeating the same track (REPEAT) Press button [5] to repeat the track being played. To cancel, press button [5] again. Playing tracks in random order (RANDOM) Press button [6] to play the tracks in random order. To cancel, press button [6] again.

  • Page 37: Ejecting The Disc

    [OPEN] button Ejecting the disc Press the [OPEN] button for less than one second. The front panel opens fully and ejects the disc. Remove the disc and press the [OPEN] button. The front panel returns to the angle before the disc ejection. If left alone for 15 seconds after the disc ejection, the front panel returns to the angle before the disc ejection after the BEEP sound.

  • Page 38: Creating A Title For A Cd

    How to operate the CD player Creating a title for a CD A CD title may be created, attached and displayed for your discs. If external CD changers are connected, a title for a CD will be created in the same way. It is assumed here that the CD to be titled is playing.
  • Page 39 Turn the [SEL] button to the left or right to select characters. Turn to the right: Advances the character forward in its type. Turn to the left: Moves the character backward in its type. [Upper-case alphabet characters] Initial value [A] A B C .

  • Page 40: Changing A Previously Set Title

    How to operate the CD player Changing a previously set title If external CD changers are connected, a previously set title for a CD will be changed in the same way. It is assumed here that the disc mode is selected. Press the [FUNC] button while in the Disc mode.

  • Page 41: Deleting A Previously Created Title

    Deleting a previously created title If external CD changers are connected, a previously created title for a CD will be deleted in the same way. It is assumed here that the disc mode is selected. Press the [FUNC] button while in the Disc mode. Turn [SEL] button to select DISC TITLE.

  • Page 42: Displaying Cd Text

    How to operate the CD player Displaying CD TEXT Only the built-in CD player supports CD TEXT. It can not be displayed with the optional CD changer. If the CD came with a logo shown below, it is recorded with a disc title and track titles. These information will be displayed during playback.

  • Page 43: How To Operate The Mp3 Player

    How to operate the MP3 player MP3 files can only be played when E-COM is connected. About MP3 The making of MP3 files by recording from sources such as broadcasts, records, recordings, videos and live performances ATTENTION without permission from the copyright holder for uses other than personal enjoyment is prohibited.

  • Page 44: Format Of Discs

    How to operate the MP3 player Media Media capable of playing MP3 includes CD-ROM and CD-R discs. Compared to CD-ROM media commonly used for music discs, CD-R discs are fragile in high temperature/high humidity environments and one section of the CD-R may become incapable of playback. Fingerprints or scratches on the disc may prevent playback or cause skipping during playback.

  • Page 45: Playing Mp3

    File names Only files with the MP3 file extension ".mp3" can be recognized as MP3 and played. Be sure to save MP3 files with the ".mp3" file extension. The "MP" letters of the file extension will be recognized whether entered as uppercase letters or lowercase letters.

  • Page 46: Listening To Mp3 File

    How to operate the MP3 player [DISC] button Listening to MP3 file Press the [DISC] button. This starts MP3 file play. If an external CD changer is connected, each additional press of the [DISC] button will switch modes from CD changer 1 ➔ CD changer 2 ➔...

  • Page 47: Advancing To The Next Track (File) Or Returning To The Beginning Of The Track (File) Being Played

    Buttons [1] and [2] Advancing to the next track (file) or returning to the beginning of the track (file) being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track (file). Turn to the left: Skipping to the next or previous folder Press button [1] or [2].

  • Page 48: Playing The Beginning Of Files (Scan)

    How to operate the MP3 player Playing the beginning of files (SCAN) Press button [4]. Press the button briefly to play just the first 10 seconds of each song for all the files in the same layer of the folder being played.

  • Page 49: Playing Files In Random Order (Random)

    Playing files in random order (RANDOM) Press button [6]. Press the button briefly to randomly play the files in the same layer as the folder being played. Pressing the button until [ALL RANDOM] is displayed will randomly play the files in all the folders. To cancel, press button [6] again.

  • Page 50: How To Operate The Tuner

    How to operate the tuner How to operate the tuner [FM AM] button First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting) Tuning to a station Press the [FM AM] button to switch to the desired FM or...

  • Page 51: Entering Stations Into Memory Automatically (The Automatic Preset Mode: Asm)

    [FM AM] button Entering stations into memory automatically (The automatic preset mode: ASM) Press the [FM AM] button to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

  • Page 52: Manually Setting Stations Into Memory

    How to operate the tuner [FM AM] button Manually setting stations into memory This section covers the setting of stations in memory under the numbered buttons. Press the [FM AM] button to switch between FM and AM. Turn the [SEL] button to the right or left to tune to the station to be entered in memory.

  • Page 53: Preset Station Scan

    Preset station scan This function enables reception of all the stations in the preset buttons for five seconds each. Press the [SEL] button for less than one second. [P SCAN] will appear at the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.

  • Page 54: Fm Reception Characteristics

    How to operate the tuner FM reception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle.

  • Page 55: Reception Area Of Fm Broadcasts

    RECEPTION AREA OF FM BROADCASTS A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limited because of varying conditions encountered while driving, including the types and heights of broadcast antenna structures, signal strength, engine noise, etc.

  • Page 56: How To Use An Optional Card Remote Control

    How to use an optional Card remote control How to use an optional Card remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.

  • Page 57: Turning The Power On/Off

    Remote-control light receptor TITLE SCAN SCAN Turning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. Press the [PWR] button. The power turns on or off each time the button is pressed. When the main unit is shut down, the remote control will not work.

  • Page 58: Switching Playback Modes

    How to use an optional Card remote control [MODE] button Switching playback modes Press the [MODE] button. Press the button to switch modes in the following sequence: Tuner How to play the tuner Select the tuner mode first. Selecting the FM/AM band Press the [BAND] button.

  • Page 59: Selecting Preset Stations

    Selecting a station (manually or automatically) A short press of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. Press the [ ] button: Tunes to higher frequency stations. ] button: Tunes to lower frequency stations. Selecting preset stations A total of six stations may be selected (preset tuning) out of those already set in memory through the main unit.

  • Page 60: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    How to use an optional Card remote control [MUTE] button TRACK•APS ] buttons Advancing to the next track or returning to the beginning of the track being played Press the [ ] button: Skips to the next track. ] button: Returns to the beginning of the track being Hold the [ ] button down to fast forward, or the [ rewind through the track being played.

  • Page 61: Switching The Remote Control Settings

    [SEL] button [FUNC] button [RTN] button Switching the remote control settings Remote control functions can be switched to the three patterns. Press the [FUNC] button of the main unit. Turn [SEL] button to select REMOTE. Press the [SEL] button. The remote control function switching mode is activated. Turn [SEL] button to select a pattern.

  • Page 62: Replacing The Battery

    How to use an optional Card remote control Replacing the battery To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor Warning immediately. Use one CR2025 battery. On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carrier with your fingernail.

  • Page 63: How To Use An Optional Nob Remote Control

    How to use an optional NOB remote control Remote-control light receptor Turning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. Press the [PWR] button. The power turns on or off each time the button is pressed.

  • Page 64: Switching Playback Modes

    How to use an optional NOB remote control [BAND] button Switching playback modes Press the [MODE] button. Press the button to switch modes in the following sequence: Tuner Disc How to play the tuner Select the tuner mode first. Selecting the FM/AM band Press the [BAND] button.

  • Page 65: Selecting A Station (Manually Or Automatically)

    [BAND] button TUNE•SEEK ] buttons Selecting a station (manually or automatically) A short press of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. Press the [ ] button: Tunes to higher frequency stations. ] button: Tunes to lower frequency stations.

  • Page 66: Illuminating The Nob Remote Control

    How to use an optional NOB remote control TRACK ] buttons [E-COM] button Advancing to the next track or returning to the beginning of the track being played Press the [ ] button: Skips to the next track. ] button: Returns to the beginning of the track being Hold the [ ] button down to fast forward, or the [ rewind through the track being played.

  • Page 67: Switching The Remote Control Settings

    [SEL] button [FUNC] button [RTN] button Switching the remote control settings Remote control functions can be switched to the three patterns. Press the [FUNC] button of the main unit. Turn [SEL] button to select REMOTE. Press the [SEL] button. The remote control function switching mode is activated. Turn [SEL] button to select a pattern.

  • Page 68: Replacing The Battery

    How to use an optional NOB remote control Replacing the battery To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor Warning immediately. Use two AA-size batteries. Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow.
  • Page 69 •Be extremely careful not to swallow the battery. •The battery life is approximately one year. If the remote Caution control unit does not operate correctly or if the button lamp gets dim, replace the batteries. •Be sure to orient the batteries correctly so that the positive and negative poles match the diagram.

  • Page 70: How To Operate The Receiver With An Optional Cd Changer Connected

    How to operate the receiver with an optional CD changer connected How to operate the receiver with an optional CD changer connected [DISC] button This section covers the operation of an optional CD changer that is connected to the receiver. To switch from another mode, press the [DISC] button.

  • Page 71: Playing The Beginning Of Tracks (Scan)

    Playing the beginning of tracks (SCAN) Press button [4]. Pressing the button causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again.

  • Page 72: Playing Tracks In Random Order (Random)

    How to operate the receiver with an optional CD changer connected Buttons [1] and [2] Playing tracks in random order (RANDOM) Press button [6]. Pressing on the button causes the changer to play the tracks on the currently playing CD in random order. Hold the button until the [ALL RAND] display appears to play tracks from all of CDs loaded in the currently selected changer, in random order.

  • Page 73: Specifying A Cd To Play

    Specifying a CD to play A CD of your choice is directly selectable out of the loaded discs. Press the [SEL] button for less than one second. Press a button from [1] to [6]. Buttons To select a CD from nos. 7 to 12, press the desired button considerably longer.

  • Page 74: How To Operate The Receiver With An Optional Dsp/Eq Unit Connected

    How to operate the receiver with an optional DSP/EQ unit connected How to operate the receiver with an optional DSP/EQ unit connected How to operate the DSP functions The DSP feature adds reverberations to simulate ambience in different types of surroundings (room sizes). Press the [SOUND] button.
  • Page 75 How to operate the receiver with an optional DSP/EQ unit connected Fine-tuning an individual room-size mode Detailed adjustments are available in any of the room size modes. Select the room size. Refer to "Switching room sizes." Turn the [SEL] button to select the desired mode of adjustment.
  • Page 76 How to operate the receiver with an optional DSP/EQ unit connected Hold down a button, [1] to [6], for more than two seconds to preset a value. The preset value is overwritten by the value set using the above steps. Direct (original sound) High Level...

  • Page 77: How To Operate The Eq Functions

    How to operate the EQ functions The EQ functions enable level adjustments of various frequency groups for optimum listening conditions with a specific kind of music or musical instrument. Press the [SOUND] button. The sound adjustment mode is activated. Turn [SEL] button to select EQ. Press the [SEL] button.
  • Page 78 How to operate the receiver with an optional DSP/EQ unit connected Fine-tuning EQ functions Press the [SEL] button until the desired equalizer mode is displayed. Turn the [SEL] button to switch frequencies. The frequencies will switch in the following sequence: 63Hz 125Hz 250Hz 500Hz 1kHz 4kHz 12kHz Press the [SEEK [SEEK...

  • Page 79: Selecting An Equalizer Mode From Memory

    How to operate the receiver with an optional DSP/EQ unit connected Buttons [1] to [6] Selecting an equalizer mode from memory Press a preset button to select the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons.

  • Page 80: Others

    Others Others [DISC] button Connecting Portable Audio Players to the AUX Jack Use a commonly available accessory cord with stereo mini-plug to connect the audio output jack (LINE) or headphone jack of a portable audio player to the AUX (auxiliary) jack of this system. Turn on the portable audio player and start its play function.

  • Page 81: If You Have A Question

    If you have a question: First check the items mentioned below before attempting to troubleshoot problems. If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, Caution press the [RESET] button using a sharp tool. Pressing the [RESET] button will delete all the entries from memory.

  • Page 82: Displayed Information (For Troubleshooting)

    If you have a question: Displayed information (for troubleshooting) The information listed in the chart below is displayed to show the status of the CD player and CD changer. Refer to the chart for the appropriate action. Information Code Table Information Contents 2 NO DISC LOADED IN THE MAGAZINE...
  • Page 83 Mode Problem Is the volume control up sufficiently? Is the muting function in effect (MUTE)? Dead or Is the fader or balance control set far weak sound to one side? Other probable causes include broken audio-signal wiring or a faulty speaker.
  • Page 84 If you have a question: Mode Problem The disc cannot be inserted. The disc is ejected as soon as it is insertaed. Or, the disc cannot be ejected. The disc cannot be changed. Sound skips around. Sound is intermittent. Sound is bad in quality. The disc cannot be ejected.

  • Page 85: Specifications

    Specifications < > GENERAL Power Supply Current Drain Dimensions (W x H x D) In-Dash Unit Mass (weight) < > FM TUNER Frequency Range Usable Sensitivity Frequency Response Stereo Separation < > AM TUNER Frequency Range Usable Sensitivity < > CD SECTION Frequency Response Wow &...

  • Page 86: Before Installation

    Before installation Before installation Note Be sure to disconnect the battery's negative terminal before installing the receiver. Components Main unit Mounting sleeve Side bracket Rear bracket Bezel Bushing Self-tapping screw (6 x 16 mm) Stud bolt Flat head screw (5 x 8 mm) Hex-head bolt (5 x 20 mm) Hex nut (5 mm) Interconnecting cable...

  • Page 87: Installation Angle

    Installation angle In order to maintain proper functioning, install the unit within an angle of 30 degrees from horizontal (standard). If this is not done, sound skipping or ejection of the CD may occur. Before installation FRONT WITHIN AN ANGLE OF 30 DEGREES STANDARD...

  • Page 88: Mounting Instruction

    Mounting instruction Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicle console. Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve. DASH BOARD OR CONSOLE MOUNTING SLEEVE...
  • Page 89 Mount the stud bolt to the main unit. Insert the main unit into the mounting sleeve until it locks in place. Fasten the rear of the main unit using either method [A] or [B]. Select method [A] or [B] to suit the interior configuration of the vehicle.

  • Page 90: Names Of Lead Wires And Destinations

    Mounting instruction Note To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads. If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).

  • Page 91: System

    Mounting instruction System CD5423 CD5423 CH3083 CD5423 CH3083 CH3083...
  • Page 92 Mounting instruction...
  • Page 93 Mounting instruction...
  • Page 94 Mounting instruction...
  • Page 95 IMPORTANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRAWER.
  • Page 96 CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD5423 for identification. The serial number is labeled or stamped on the chassis. Serial No. DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502...

Table of Contents

Save PDF