DMP Electronics SecurityCommand XR10 User Manual page 26

Numeric Pager Display
00128–301 234
Account Message
Number I D
Account Number
This number has been programmed into your Security Command system
as an identifier. Whenever the system sends a message to your pager, it
will always send the account number first to identify itself.
Message ID
This is always a single digit, 1 to 6, that describes the message sent.
1 = Zone Alarm 3 = Area(s) Arming
2 = Zone Trouble 4 = Area(s) Disarming
Zone, Area, or User Number
If this message is for a zone, the 1 to 2 digit zone number is displayed.
If this message is for areas that are being armed or disarmed, the area
numbers are shown in sequential order. Example: 1 2 4.
22
Always Zone, Area, or
Zero User Number
6 = User Checkin
System Setup