Menu #1 - Basic Features; Menu #2 - Remote Start Features - Directed Electronics PYTHON 480XP Installation Manual

System Features Menus

Menu #1 - Basic Features

Items in bold text have been programmed to the default setting at the factory.
Feature Default LED ON Setting
Number (Press Channel 1)
1-1 Active arming
1-2 Chirps ON
1-3 Ignition controlled door locks ON
1-4 Active locking only
1-5 0.8 second door lock pulses
1-6 Double pulse unlock OFF
1-7 Channel 2 output - delayed validity (1)* Channel 2 output - Instant validity
1-8 Factory disarm with Channel 2 ON
1-9 Code Hopping ON
*
NOTE: The numbers in parentheses indicate the number of times the LED will flash.

Menu #2 - Remote Start Features

Feature Default LED ON Setting
Number (Press Channel 1)
2-1 Engine Checking ON
2-2 Tachometer checking type
2-3 12 minutes run time
2-4 Flashing parking light output
2-5 Cranking time 0.6 sec. (1)*
2-6 High voltage check level
2-7 Auxiliary output - factory disarm
2-8 Normal status output
2-9 Anti-grind ON
*
NOTE: The numbers in parentheses indicate the number of times the LED will flash.
© 2002
Directed Electronics, Inc.
LED OFF Setting
(Press Channel 2)
Passive arming
Chirps OFF
Ignition controlled door locks OFF
Passive locking
3.5 second door lock pulses
Double pulse unlock ON
(2)/latched (3)/latched reset with
ignition (4)/30-second timed (5)/
second unlock (6)*
Factory disarm with Channel 2 OFF
Code Hopping OFF
LED OFF Setting
(Press Channel 2)
Engine Checking OFF
Voltage checking type
24 minutes, 60 minutes run time
Constant parking light output
Cranking time - 0.8 (2), 1.0 (3), 1.2 (4),
1.4 (5), 1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9)*
Low voltage check level
Auxilliary output - special accessory
Factory rearm output
Anti-grind OFF
23