Table of Contents
Advertisement
4.
5.
The LED will now report the last system shutdown by flashing for one minute in the below grouped
patterns; the LED will stop flashing when the ignition is turned on.
LED FLASHES
One
Two
Three
Four
Five
Six
Seven
Eight
Rapid Resume Logic
Rapid Resume Logic ensures that the when the system is powered up it will return to the same state
it was in when power is disconnected. For a full description of Rapid Resume Logic refer to the
owner's manual.
Timer Mode
Timer Mode allows the operator to program the remote start system to start the engine every three
hours a total of 6 times. For a full description of Timer Mode activation refer to the owner's manual.
©
2002
Directed Electronics, Inc.
Release the Valet/program switch.
Press and release the Valet/program switch.
SHUTDOWN MODE
System timed out
Over-rev shutdown
Low or no RPM
Transmitter Shutdown (or optional push-button)
(-) Shutdown
(+) Shutdown
(-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Wait-to-start timed out
31
Advertisement
Table of Contents
