To Enter Feature Programming Routine; Once A Feature Is Programmed; Accessing Another Feature; Accessing Another Menu - Directed Electronics AM1 Installation Manual

to enter feature programming routine

1. Open a door.
2. Turn the ignition on and then off.
3. Within 5-seconds, press and hold the integrated LED/Valet
onds the horn will sound once to indicate entry into the first features menu. To select
the second features menu, continue to hold the integrated LED/Valet
horn sounds twice. Once the desired menu is selected, release the integrated
LED/Valet ® switch.
4. Within 5-seconds, press and release the integrated LED/Valet
of times corresponding to the desired feature listed below. Then press the integrated
LED/Valet switch one more time and hold. The horn will sound the number of times
®
equal to the feature number selected.
5. While holding the integrated LED/Valet
tory button by either pressing Lock for 1 short horn honk setting or pressing Unlock
for 2 short horn honk setting.

once a feature is programmed

Another feature(s) can be programmed.
The other feature menu can be selected.
The Learn Routine can be exited.

accessing another feature

Release, then press and release the integrated LED/Valet
times to advance from the feature just programmed to the next feature desired.
Press and hold the integrated LED/Valet

accessing another menu

Release, then press and release hold the integrated LED/Valet
28
switch. After 3-sec-
®
switch until the
®
switch the number
®
switch, assign the selected feature to a fac-
®
switch the number of
®
switch once more.
®
® switch.
© 2003 directed electronics, inc.