To Learn Lock; To Learn Unlock - Directed Electronics AM1 Installation Manual

to learn lock:

1. Open a door.
2. Within 5-seconds: Press and release the integrated LED/Valet
3. Within 5-seconds: Turn the ignition On and then Off (leave for less than 2-seconds
in the on position).
4. Within 5-seconds: Press and hold the integrated LED/Valet
flash to indicate that the lock routine is ready to be learned.
5. Press lock button: Press the lock button on the factory transmitter. The LED will illu-
minate for a maximum of 5-seconds to indicate the the lock learn was successful. If
the learn was unsuccessful the LED would continue to flash.
6. Release the integrated LED/Valet
tine.

to learn unlock:

1. Within 5-seconds of the learn lock routine (step 6), press and release the integrat-
ed LED/Valet switch once.
®
2. Within 5-seconds: Press and hold the integrated LED/Valet
flash in groups of two flashes to indicate that the unlock routine is ready to be learned.
3. Press unlock button: Press the unlock button on the factory transmitter. The LED will
illumiate for a maximum of 5-seconds to indicate that the unlock learn was success-
ful. If the learn was unsuccessful the LED would continue to flash in groups of two.
4. Release the integrated LED/Valet
N N O O T T E E : : If the Unlock learn was unsuccessful, the Unlock procedure can be repeated
by using the LOCK learn procedure, except that at step 2 press and release the inte-
grated LED/Valet® switch TWICE. (The LED will flash in groups of w flashes.)
© 2003 directed electronics, inc.
®
® switch. The LED will
switch. Now advance to the learn Unlock rou-
®
® switch. The LED will
® switch.
switch once.
23