Features #2 Menu - Directed Electronics AM1 Installation Manual

Feature steps 5 and 6 are related. If Auxiliary Output Enabled is selected in feature 5
then either Auxiliary Output or Delayed Accessory Output can be selected in feature
step 6. Examples of this are where Auxiliary Output is used to provide a momentary
800msec pulse on the RED/WHITE wire of the main harness (can be used for open-
ing the trunk). The delayed accessory output is used to allow selected vehicle acces-
sories to remain on (such as radio) when the ignition is turned off. This output will
remain active for 1 hour, or until a door is opened and closed, or when a button on
the factory remote transmitter is pressed.

features #2 menu

Default settings are shown in bold.
N N O O T T E E : : Feature step number 6 and 7 are not applicable to the 427A.
Feature
Lock Button (one chirp)
Step
1 Ignition-Controlled Locking ON
2 Ignition-Controlled UnLocking ON Ignition-Controlled Unlocking OFF
3 Active Locking
4 Door Lock Pulse Duration–0.8 sec. Door Lock Pulse Duration–3.5 sec.
5 Single Unlock Pulse
6 Channel 3: Validity
7 Code Hopping ON
30
Unlock Button (two chirps)
Ignition-Controlled Locking OFF
Passive Locking
Double Unlock Pulse
Channel 3: Second Unlock
Code Hopping OFF
© 2003 directed electronics, inc.