Remote-Control-Programming; Enter-Programming; Exit-Programming; Sleep Mode - Directed Electronics 1090 Owner's Manual

remote control programming
The remote control can be programmed for your particular preferences.
Programming is performed using the programming and function buttons as
described below.
Function button operations during programming:
Press the or
items.
�������
• Press the
�������
• Press the
�������
➜ Enter programming
Press and hold for 3 seconds the round programming button on the rear of
the remote control. The programming main menu will appear. Use the func-
tion buttons as described above to navigate and change the features.
➜ exit programming
Press the button anytime to save the settings and exit program-
�������
ming, or, if more than 10 seconds lapses between button presses, the
remote control will automatically save the settings and exit program-
ming mode.

➜ sleep mode

The remote control can be put into sleep mode to save battery power
© 2 0 0 6 d i re c t e d e le c t r on i c s— a l l r ig ht s r es e r v e d
button to scroll and highlight menu and feature
button to choose the highlighted item
button to exit programming anytime