Connectors: Ethernet Interface (P1) - Digi One EM Hardware Reference Manual

Connectors: Ethernet Interface (P1)

The Digi One EM Ethernet connector is an eight-wire, RJ-45
jack meeting the requirements of ISO 8877 for 10/100Base-
T. The following figure helps you locate pins and the table
helps you identify which signal uses each pin.
Pin
1
2
3
4
5
6
7
8
10
Signal Name
TxD+ (Transmit Data)
TxD- (Transmit Data)
RxD+ (Receive Data)
Not used
Not used
RxD- (Receive Data)
Not used
Not used
Digi One EM Hardware Reference