File Quick Access; Exit - Delta Electronics DUP-B Series User Manual

3.5.12

File Quick Access

By default, ScrEdit presents a list of the four most recent used files on the File menu for quick
access (Fig. 3-5-14). Just click the file name to open the file. This function is similar to the
Open command and the user can refer to the description of Open command on the page 3-43.
If the saving path is too long, the too long path will display as "....". The user still can see the
complete dpb file name.
3.5.13

Exit

Exit function is to close all open editing files and save those that have not been save yet and
finally exit the ScrEdit. Select this function by clicking File > Exit. If the file has been changed
or not saved yet, the saving dialog box (Fig. 3-5-2) will show up to remind the user of saving
project. If the user press Cancel button at this time, the exit command is cancelled. Either
pressing Yes button to save the file, or pressing No button not to save the file can exit the
ScrEdit. After the user press the Yes button, the Save As dialog box will appear (Fig. 3-5-4) for
saving the file.
Revision May, 2010
Fig. 3-5-14 Most recent used files
Chapter 3 Creating and Editing Screens
3-49