Delta Electronics DUP-B Series User Manual page 249

Chapter 3 Creating and Editing Screens
Upload/Download
Startup Delay Time
Clock Macro Delay Time
Clock Macro Priority
Background macro
update cycle
Show disk access error
message
Control Address
Length
3-228
General tab in Configuration option
The user can select USB or PC communication port (i.e. RS-232) or
Ethernet to upload and download.
Use to set delay time for waiting the startup of external controller
(i.e. PLC). The range is between 0 ~ 255 seconds.
Use to set interval time when executing clock macro. The range is
100 – 65535 ms.
Used to set the priority when executing clock macro. Setting this
option can ensure the more correct clock macro delay time.
Used to set the executing lines when executing background macro
for one cycle. The range is 1~512 lines.
When this option is set, if an error occurred when accessing the
alarm, history buffer, and recipe data via USB disk, an error
message will show up on the screen to alert the user.
Control Block tab in Configuration option
Use to set the starting address of system control block.
The length of control block will be different depending on
different function. (For example, the length should be at least 8
Words when using multi-language function.)
For more detailed information of system control block, refer to
section 3.4.
Please note that the when the control block size is set to 0,
the control block function is disabled.
Revision May, 2010