Delta Electronics DUP-B Series User Manual page 313

Chapter 3 Creating and Editing Screens
Syntax Check
This command examines if the macro syntax is correct.
The user can use this function to examine if the macro synta
macro syntax is in error, the following error message dialog box will pop up to alert
the user. At this time, please examine the macro syntax again.
Please note that the operation of Syntax Check is different than the compile operation
of macro files. The compile operation of macro file is performed when the compile
operation of HMI program is executed. The compile operation of the macro file and
HMI program is executed simultaneously.
Update
This command updates macro files.
The modification will not be updated if Up
gives user a second chance to decide if modify the macros or not. Therefore, if the user
forgets to press Update button after editing, the user should re-do it again.
When Update button is pressed, the following dialog box will show up on the
After Yes button is pressed, the system will examine if the macr syntax is correct. If
the macro syntax is correct, the update function will be executed and the macro files
will be updated. However, if the macro syntax is not correct, the following error
message dialog box will pop up on the screen to alert the user to examine the macro
syntax again.
3-292
x is correct or not. If the
date button is not pressed after editing. This
screen.
o
Revision May, 2010