Dynamic Rectangle - Delta Electronics DUP-B Series User Manual

Chapter 3 Creating and Editing Screens
Line Color
Blink
Line Size
Data Format
Line Style
Variable Position (Please refer to the description of Read Address above)
Variable Color
X
Y
Width
Height

3.8.9.4 Dynamic Rectangle

The dynamic rectangle element, including element size and color can be changed and
moved depending on the value of the corresponding contact or register.
Read Address
3-150
Property Description of Dynamic Line Element
Used to set the display color of the dynamic line element.
The element can blink to remind the user. (Please refer to Table
3-8-2 Property Description of General Buttons.)
The unit is Pixel and the range is within 1 ~ 8.
It provides BCD, Signed Decimal, Unsigned Decimal and Hex four
kinds of data format to define the read memory content.
There are following line styles can be selected.
(Please refer to the description of Read Address above)
Used to set X coordinate
Used to set Y coordinate
Used to set the element width
Used to set the element height
Property Description of Dynamic Rectangle Element
The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Read Address
Read Address +1
The value of the Read Address can be used
only when Variable Position option is set to
Yes. It is used to represent the left-top
horizontal position (Left) of the element, i.e.
the first X coordinate on the screen (X
The value of the Read Address+1 can be used
only when Variable Position option is set to
Yes. It is used to represent the left-top vertical
position (Top) of the element, i.e. the first Y
coordinate on the screen (Y
).
1
)..
1
Revision May, 2010