Increment / Decrement - Delta Electronics DUP-B Series User Manual

Chapter 3 Creating and Editing Screens
After Execute
Macro
Enable the
confirm window
Invisible Address When this option is set to On, this button element will be invisible.
X
Y
Width
Height

3.8.2.5 Increment / Decrement

After pressing this button on the screen, HMI will read the value from PLC (Controller)
and add or subtract the set constant value. Then, write the result into PLC (Controller)
corresponding register. If the addition or subtraction result exceeds the limit
(minimum and maximum) set in HMI, HMI will save the limit value (minimum and
maximum) into the PLC (Controller) corresponding address.
Write Address
Read Address
Text
Text Size
Font
Text Color
Bank (Picture Bank)
Picture Name
Transparent Effect
Transparent Color
Foreground Color
Style
Function
3-106
Property Description of Set Constant Buttons
If this option is set, when the user presses the button, the system
will perform the operation of this button first and then execute the
command of this macro. But, if the state of the button is not
triggered by pressing the button (via macro or external signal), the
command of this macro will not be executed.
When this option is set, an Action Confirm dialog box will appear
to prompt the user everytime when the button is pressed.
Used to set X coordinate
Used to set Y coordinate
Used to set the element width
Used to set the element height
Property Description of Increment / Decrement Buttons
The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
The user can set the text, text size, font and text color provided by
Windows® to determine the text display on the element (Please
refer to Table 3-8-2 Property Description of General Buttons.)
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
The user can modify the element characteristic directly without
re-create a new element. The elements that their characteristics
can be modified directly by using this option are: Increment button
and Decrement button.
Revision May, 2010