Delta Electronics DUP-B Series User Manual page 355

Chapter 3 Creating and Editing Screens

BIN (Converts BCD Data into BIN Value)
Equation
Var1 = BIN (Var2)
Explanation
The BCD data in Var2 is converted into binary value and stored in Var1.
Remark
The calculation result can be stored as unsigned WORD or DWORD.

Var1 and Var2 can be internal memory only.

Example
After executing BIN command, the BCD data in $0 is converted to a binary value and
stored in $1 (this is an operation of unsigned 16-bit data).

TODWORD (Convert WORD to DWORD)
Equation
Var1 = TODWORD (Var2)
Explanation
The WORD value in Var2 is converted into DWORD value and stored in Var1.
Remark
The calculation result can be stored as unsigned WORD or DWORD.

Var1 and Var2 can be internal memory only.

3-334
Revision May, 2010