Delta Electronics DUP-B Series User Manual page 147

Chapter 3 Creating and Editing Screens
Setting
3-126
Property Description of Pipe (1) / Pipe (2) Elements
Minimum Value
Maximum Value
Target
Value
Color
Ranges (Enable
range setting)
Variable
target/range limits
When the user has input the target value, low & high limit, and
minimum & maximum value, after pressing OK button, HMI will
examine the value by referring to the selected data length and data
format.
Data Length:
There are 16bits Word and 32bits
Double Word two options.
Memory Format:
here are following data format
provided:
Word/Double Word
1. BCD
2. Signed BCD
3. Signed Decimal
4. Unsigned Decimal
5. Hex
Used to set the minimum and maximum
capacity of the pipe element.
The user can decide if the target value
displays or not by using this option.
Please refer to the description of Low & High
Region Color.
When the target value and low & high limit is a
variable value, the low limit address is Read
Address+1, the high limit address is Read
Address+2 and the address of target value is
Read Address+3.
Revision May, 2010