Initial Settings; Setting The Operating Conditions Of The Rcp-D50/D51; Setting The Built-In Clock - Sony RCP-D50 Operating Instructions Manual

Initial Settings

Setting the Operating Conditions
of the RCP-D50/D51
By using the RCP Config menu or LCD setting
display, you can set the built-in clock of the RCP-D50/
D51 and adjust various conditions of the RCP-D50/
D51, such as the sound volume of the warning buzzer
and the brightness of the indicators and LCD.
Displaying the RCP Config menu/LCD
setting display
Proceed as follows:
PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS FUNCTION MONITOR
MENU
Others Menu
Adjusting
RCP
LCD
Config
MONITOR
BRIGHT
1
Press to light the OTHERS button of the menu
operation block.
The OTHERS menu appears.
2
To display RCP Config menu, press
[RCP Config]
.
The RCP Config menu appears.
1
Camera
File
Config
2
LCD Memory
Moni.
Stick
CONTRAST
RCP Config. Menu
RCP RE
Adjusting Setting
Cable SW Camera
Comp Setting
To obtain the LCD setting display, press
The LCD setting display

Setting the Built-in Clock

The RCP-D50/D51 has a built-in clock to record the
date and time when scene files are saved to Memory
Sticks.
To set the clock, proceed as follows:
1
Press the OTHERS button in the Menu operation
block so that the OTHERS menu is displayed on
[RCP Config]
the LCD, then press
Config menu.
2
Set the menu to Advanced Setting mode.
[Security]
1) Press on the RCP Config menu.
2) Press and highlight
[Status] [Menu Set]
The ,
buttons are displayed.
[Status]
3) Press .
The Security Status menu appears.
[Advance Mode]
4) Press
3
[Date/Time]
Press on the RCP Config menu.
The current setting is displayed on the Date/Time
Set menu.
Date Time Set Menu
2001/11/17
(Sat)
22 : 12 : 31
Date Time
Exit
Date
No. Time
Secu-
rity
[LCD]
appears.
(page 48)
to call the RCP
[Engineer Mode]
.
[Code No.]
, and
.
Exit
.
45