Sony RCP-D50 Operating Instructions Manual page 28

Menu Configuration and Basic Menu Operations
Page Menu
Paint 2 Detail
Cross Color
Skin Detail
28
Submenu Control item
Detail 1 • Level
• H/V Ratio
• Frequency
• V-Limit
Detail 2 • Crispening
• Level Dep
• High L.
• AFT GAM
Detail 3 Aperture
Knee Apert
• Aperture
• Knee Apert
Comb Filter R
Comb Filter G
• CCS Level
Skin Detail 1 Detail Gate
Skin DTL
Auto Skin
• Level
• Size
• R-Y
• B-Y
Skin Detail 2 Skin Gate
Skin DTL
Auto Skin
• Level
• Posi
• R-Y
• B-Y
Function
To adjust the detail (contour correction) level
To adjust the ratio of V (vertical) detail to H (horizontal) detail in
detail correction. As the value becomes larger, the V detail ratio
increases.
To adjust the boost frequency (thickness of contour lines) for the
detail correction
To adjust the limit value for vertical detail
To adjust the crispening level (appropriate level at which details of
noise signals are removed)
To adjust the level dependence (level at which the detail signal starts
being suppressed)
To adjust the amount of suppression of highlight detail (detail added
to a high-luminance area)
To adjust the amount of detail added after gamma correction
To turn the aperture correction ON/OFF
To turn ON/OFF the detail correction to the level higher than the
knee point
To adjust the amount of aperture correction
To adjust the amount of detail correction to the level higher than the
knee point
To turn the red comb filter in the detail circuit ON/OFF. If OFF is
selected, clarity improves, but cross color increases.
To turn the green comb filter in the detail circuit ON/OFF. If OFF is
selected, clarity improves, but cross color increases.
To adjust the cross color suppress level to suppress the phenomenon
of color jittering or coloring when a minutely striped pattern is shot
To turn ON/OFF the skin gate area (target color range of skin detail
correction or skin matrix adjustment)
To turn the skin detail function (which suppresses the contour
correction in the selected area) ON/OFF
The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
To adjust the amount of skin detail correction. As the value becomes
larger, the amount of detail in the skin gate area decreases.
To adjust the R–Y and B–Y ranges of the skin gate area (for setting
each range to the same value at the same time)
To adjust the R–Y range of the skin gate area
To adjust the B–Y range of the skin gate area
To turn the display of skin gate area ON/OFF
To turn the skin detail function ON/OFF
The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
To adjust the skin detail level
To adjust the R–Y and B–Y position of the skin detail gate area (for
setting each range to the same value at the same time)
To adjust the R–Y position of the skin detail gate area
To adjust the B–Y position of the skin detail gate area