Menu Items With The Ccu-Tx50 - Sony RCP-D50 Operating Instructions Manual

Menu Configuration and Basic Menu Operations

Menu Items with the CCU-TX50

The "Control items" marked with
to the control knobs. The other items are operated on
the menu display.
Paint menu (with the CCU-TX50)
Paint menu consists of pages 1 to 5.
You can select page 1 through 3 directly by pressing
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.
Pressing v or V of the page selected with a MENU
button flip pages 1 through 5 in sequence.
Page Menu
Paint 1 White
Black
Flare
Gamma/Knee
38
are those assigned
z
Submenu Control item
White Preset
Memory A
Memory B
ATW
• R
• B
• R
• B
• Master
Flare Off
• R
• G
• B
Auto Knee
• Gamma
• Blk Gamma
• Knee Point
• Knee Slope
The items displayed differ according to whether the
unit is in Advanced Setting mode or in Normal Setting
mode. The items shaded (
displayed only in Advanced Setting mode.
Switching between Normal Setting mode and
Advanced Setting mode is performed in RCP Config
(Security → Status) on the OTHERS menu.
Paint 4 and 5 can also be selected in sequence by
pressing the PAINT 3 button.
Function
To retrieve the white balance settings preset by the camera
To retrieve the white-balance settings stored in Memory A. The
retrieved settings can be adjusted in Auto or Manual mode (the
adjusted values are stored in Memory A).
To retrieve the white-balance settings stored in Memory B. The
retrieved settings can be adjusted in Auto or Manual mode (the
adjusted values are stored in Memory B).
To turn ON/OFF the Auto Tracing White function (which
automatically adjusts the white balance when lighting conditions
change)
To adjust the gain of the R signal in the white when Memory A or
Memory B is pressed
To adjust the gain of the B signal in the white when Memory A or
Memory B is pressed
To adjust the gain of the R signal in the black
To adjust the gain of the B signal in the black
To adjust the master black
To turn the flare (black level when flare is generated) correction
function ON/OFF
To adjust the amount of flare correction for the R signal
To adjust the amount of flare correction for the G signal
To adjust the amount of flare correction for the B signal
To turn the Auto Knee circuit ON/OFF
To adjust the gamma level
To adjust the black gamma level
To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
To adjust the knee slope (amount of knee correction)
) in the table below are