Sony RCP-D50 Operating Instructions Manual page 29

Page Menu
Paint 2 Black STR
(cont.)
Paint 3 Knee/DL
Gamma
Matrix
Skin Matrix
Paint 4 White Clip
TLCS
Auto Iris
a) Only with models with the AI function
Submenu Control item
Black • Level
Stretch 1 • Stretch Level/Point 1 To adjust the upper limit of the signal levels that activate the black
• Stretch Level/Point 2 To adjust the lower limit of the signal levels that activate the black
Black • Level
Stretch 2 • Compress Level/
Point 1
• Compress Level/
Point 2
DL
Knee Preset
Auto Knee
• DL
• Point
• Slope
• Master
Init 3.5
Init 4.0
• R
• B
Matrix 1 Matrix Off
• Hue
• Sat
Matrix 2 • R-G/• G-B/• B-R
Matrix 3 • R-B/• G-R/• B-G
Skin Matrix
• Hue
• Sat
• Master
TLCS
• AGC/C.Point
• AGC/Limit
• AE/C.Point
STD
Spot Light
Back Light
AI
Function
To adjust the black stretch level
stretch function
stretch function
To adjust the black stretch level
To adjust the upper limit of the signal levels that activate the black
compress function
To adjust the lower limit of the signal levels that activate the black
compress function
To turn ON/OFF the DynaLatitude function (for automatically
setting the contrast between the bright and dark areas by detecting
the levels of the subject in these areas)
To turn ON/OFF the mode that uses the preset knee correction value
To turn the Auto Knee function ON/OFF
To select the level of the DynaLatitude effects (Low/STD/High)
To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
To adjust the knee slope (amount of knee correction)
To adjust the master gamma
To set the value of the initial part of the gamma curve for low
brightness to 3.5
To set the value of the initial part of the gamma curve for low
brightness to 4.0
To adjust the level of the R gamma
To adjust the level of the B gamma
To turn the matrix ON/OFF
To adjust the hue of the linear matrix
To adjust the color saturation of the linear matrix
To adjust the color tone for the R–G, G–B, or B–R elements of the
matrix
To adjust the color tone for the R–B, G–R, or B–G elements of the
matrix
To select the skin matrix function ON/OFF
To adjust the hue of the designated area
To adjust the color saturation of the designated area
To adjust the amount of white clip (the highest white level). As the
value becomes larger, the output level decreases.
To turn the TLCS (total level control) function ON/OFF
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris
control is switched to AGC (auto gain control)
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/18
dB) adjustment
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris
control is switched to the AE (auto exposure)
To select the standard auto iris mode
To select the auto iris mode for shooting spot-lit subjects
To select the auto iris mode for shooting back-lit subjects
To select the intelligent auto iris mode
a)
29