Sony RCP-D50 Operating Instructions Manual page 36

Menu Configuration and Basic Menu Operations
OTHERS menu (with the DXC-637 series)
Menu 2ndary menu Submenu
Camera Title ID
Config
File Copy to Slave
RCP Config RCP
Adjusting
VR Setting
Information
Cable Comp
SW Setting
CAM No.
Date/Time Set Date
36
Control item
Title IND
Clock IND
Buzzer • Call
Volume • Touch
• Switch
• Master
Call Buzzer
Touch Click
SW Click
All Off
LED Bright • Switch
• Tally
• Other
• Master
VR STD Mode
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value
M. Black VR
Cable Length
• SW Assign/Sel
• No.
• Year
• Month
• Day
Set
Cancel
Time • Hour
• Minute
• Second
Set
Cancel
Function
To turn the title display ON/OFF while the camera is in Color Bars
mode
Switching of the clock indication
Cam: To always display the clock indication
Off: No clock indication
To copy the status of the master unit to slave units
To set the volume of the call buzzer
To set the responding sound volume of the touch panel
To set the confirmation sound volume of the self-illuminating
switches
To set the total buzzer sound volume
To turn the call buzzer ON/OFF
To turn the responding sound of the touch panel ON/OFF
To turn the confirmation sound of switches ON/OFF
To turn the volume of all the buzzers ON/OFF
To set the brightness of respective LEDs
To set the brightness of the all LEDs of the unit
To select the initial settings for IRIS or MASTER BLACK
Adjustment mode: Absolute or Relative
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest
response position)
(Only available for RCP-D50) To select the response rate of the
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,
and 1/4, where 1/1 is the quickest response position)
To display the software version of the unit
To set the length of the remote cable (5 m/25 m/50 m)
To allocate a function to the ASSIGN button
No Assign: No assignment
Black/Flare: Switching the function of the BLACK/FLARE knobs
Black Auto: ON/OFF of the auto black
ATW: ON/OFF of the auto tracing white balance
TLCS: ON/OFF of the total level control function
DynaLatitude: ON/OFF of the DynaLatitude function
To select the camera number to be displayed on the RCP
Date adjustment of the clock built into the unit
Time adjustment of the clock built into the unit
(not operative)
(not operative)
(not operative)