Sony RCP-D50 Operating Instructions Manual page 22

Menu Configuration and Basic Menu Operations
Page Menu
Paint 4 White Clip
TLCS
Auto Iris
CLS/EVS
Paint 5 Low Key Sat
Auto Knee
22
Submenu Control item
• Master
TLCS
• AGC/C.Point
• AGC/Limit
• AE/C.Point
• AE/Limit
STD
Spot Light
Back Light
TLCS
Shutter
CLS
EVS
• Shutter
• CLS
• Level
Adaptive
Function
To adjust the amount of white clip (the highest white level). As the
value becomes larger, the output level decreases.
To turn the TLCS (total level control) function ON/OFF
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris
control is switched to AGC (auto gain control)
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/
18 dB) adjustment
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris
control is switched to the AE (auto exposure)
To set the upper limit value for AE control (100/150/200/250)
To select the standard auto iris mode
To select the auto iris mode for shooting spot-lit subjects
To select the auto iris mode for shooting back-lit subjects
To turn the TLCS (total level control) function ON/OFF
To turn the shutter function ON/OFF
To turn the CLS (clear scan) function (which reduces noise on the
horizontal scan lines when the monitor screen connected to a PC is
shot) ON/OFF
To turn the EVS mode (which reduces flicker by increasing the
vertical resolutions) ON/OFF
To select the shutter speed
To adjust the CLS frequency
To adjust the low key saturation level
To turn ON/OFF the function that makes the knee correction slope
smooth to make the gradation natural