Connect The Pedal Arm To The Pedal Swing Arm - Smooth Fitness AGILE DMT X2 User Manual

26 SMOOTH AGILE DMT X2
ASSEMBLY
STEP 8: Connect the Pedal Arm to the Pedal Swing Arm
(A) Slide the 20x78 – M14x35mm Bolt (505) through 20.7x29.1x0.3mm Wave
Washer (521) then into the Pedal Arm – Right (107) and Pedal Swing
Arm (108) then secure by 8mm Allen Key (C)
(B) Press the Pedal Arm Front Pivot Cover (702) into the ends of the Pedal
Arm – Right (107).
(C) Repeat the above procedure to assemble the left side.
105
521
107
108
505
702
505 X2
521 X2
702 X2
107
108
521
505
C