Using The Magnify Feature; Freezing The Screen - Hitachi CPX870D User Manual

USING THE MAGNIFY FEATURE

DOWN
BLANK
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
NOTE
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.

FREEZING THE SCREEN

PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
NOTE
• The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
22
Press the MAGNIFY (ON) button
1
The projector enters MAGNIFY mode.
LASER
Press the POSITION button, then use the lever switch
2
POSITION button again to finalize the zoom area.
3 Use the lever switch
zoom level
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
Press the FREEZE button
1
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
/ , / to select the area to zoom. Press the
POSITION
MAGNIFY
ON
POSITION
/ to adjust the
FREEZE