Using The Magnify Feature; Freezing The Screen; Temporarily Blanking The Screen - Hitachi CP-A200J User Manual

Using the magnify feature

Press the ON button of MAGNIFY on the remote control.
1.
The "MAGNIFY" indication will appear on the screen and the
projector will go into the MAGNIFY mode. When the ON button of
MAGNIFY is pressed first after the projector is started, the picture will
be zoomed twice. The indication will disappear in several seconds
with no operation.
Use the ▲/▼ cursor buttons to adjust the zoom level. To move
2.
the zoom area, press the POSITION button in the MAGNIFY mode, then use the
▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the
POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits from the MAGNIFY mode when the input signal is
changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored
when the projector exits from the MAGNIFY mode.
NOTE
• The zoom level can be finely adjusted. Closely watch the screen to find the
level you want.

Freezing the screen

Press the FREEZE button on the remote control.
1.
The "FREEZE" indication will appear on the screen (however, the
indication will not appear when the TURN OFF is selected for the
MESSAGE item in the SCREEN menu (
go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press
the FREEZE button again.
● The projector automatically exits from the FREEZE mode when some control buttons
are pressed.
● If the projector continues projecting a still image for a long time, the LCD panel might
possibly be burned in. Do not leave the projector in the FREEZE mode for too long.

Temporarily blanking the screen

Press BLANK button on the remote control.
1.
The BLANK screen will be displayed instead of the screen of input
signal. Please refer to BLANK item in SCREEN menu (
To exit from the BLANK screen and return to the input signal screen,
press BLANK button again.
● The projector automatically exits from the BLANK mode when some control buttons
are pressed.
NOTE
• The sound is not connected with the BLANK screen function.
If necessary, set the volume or mute first.
• If you want to make the screen blank and the sound muted at the same time, use AV
Mute function that is required to be assigned to one of the MY BUTTON on the remote
46).
in advance (
42)), and the projector will
40).
Operating
MAGNIFY
ON/OFF button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
VOLUME
MAGNIFY FREEZE
ON
OFF
KEYSTONE MY BUTTON MUTE
FREEZE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
VOLUME
MAGNIFY FREEZE
ON
OFF
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
BLANK button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE VOLUME
ON
23