Table of Contents
Advertisement
INSTALLATION (Continued)
Connecting the monitor
B a s e
Front View
1. Installation
Install the monitor in an suitable environment.
so as to prevent electrical shock or fire hazard.
2. Signal Cable Connection
Insert the signal input connector of the monitor to the host computer, with attention to the
suitability, and secure the screws on the connector shell firmly.
3. Power Cord Connection
(1) Make sure to use the power cord meeting the safety standard of the country in which
you are using the monitor.
(2) Insert the connector of a power cord to the AC Inlet of the monitor.
(3) Insert the plug of the power cord to a power outlet of the correct voltage.
check that the connection portion of the power cord is clean (with no dust).
insert the plug of power cord into a power outlet firmly to avoid electrical shock or fire
hazard.
Rear Cover _____z
Signal Input Connector
to a power outlet
correct voltage
of the
Rear View +
to
the host
computer
Then,
Advertisement
Table of Contents
