Table of Contents
Advertisement
Abnormal operations such as smoke, burning smell, excessive sound, etc. could cause
fire or electrical shock.
monitor and disconnect the power plug from the power outlet.
smoke or fire and contact your dealer.
The colour monitor contains high voltage components.
clean
inside.
Do not expose the monitor to rain, moisture, dust, corrosive gases, vibrations, etc. so as
to prevent electrical shock or fire hazard.
Avoid placing the monitor in direct sunlight or near heating appliances.
Do not place the monitor on an unstable base.
Do not cover this monitor or place anything against any sides (not only the top, right and
left side but also the rear and bottom sides) of the monitor. Ventilation holes are
provided at all sides of covers to prevent excessive temperature increase.
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or anything
which will generate magnetism near the unit.
colours or distortion of the displayed pattern.
Avoid direct rays of the sun or room lighting onto the CRT screen in order to prevent eye
fatigue.
Failure to do so may cause fire or electrical shock hazard.
This monitor will automatically adjust to the input voltage 100 - 120 I200 - 240V.
Before inserting the plug of the power cord into a power outlet of the correct voltage,
check that the connection portion of the power cord is clean (with no dust). Then,
insert the plug of power cord into a power outlet firmly to avoid electrical shock or fire
hazard.
For complete separation from the power source, remove the power cord from the
or
monitor
from the wall power outlet.
If you observe any abnormal operation, you should turn Off the
You should check for
Ask your dealer to repair or
A magnetic field may cause blurred
l - 3
Advertisement
Table of Contents
