Power Saving System; Signal Check - Hitachi CM771ET User Manual

Flat face colour monitor with easymenu, chassis dj72
Hide thumbs

Advertisement

POWER SAVING SYSTEM

This monitor complies with VESA and
power saving system works only when used with VESA DPMS compliant PC's and/or
graphic
controllers,
Table 1-2. Power Saving System
Power Saving
Mode
O N
Stand-by
.
Suspend
Active OFF
This monitor complies with VESA DDCIRB specifications. Plug 81 Play is a system, by
which
computer,
comply with for this user-friendly function.
DDC ready computer that is running an operating system software that incorporates
Plug 8 Play functionality.

SIGNAL CHECK

Your monitor is equipped with an automatic Signal Verification System.
below outlines the operation of this system.
Table 1-3. Signal Check
Signal Condition
Proper signal is detected The OSD indicates the horizontal The power indicator lights
by the monitor.
No Sync. Signal is detected The OSD indicates the message After 10 seconds, the
by the monitor.
A video signal is applied The OSD indicates the message The power indicator will
to the monitor that is "INVALID SCAN FREQ.".
beyond the monitor scan
range.
VESA DPMS
Video
H. Sync. V. Sync.
Active
Yes
B l a n k e d N o
Blanked
Yes
B l a n k e d N o
peripherals
(including
Indication of OSD
frequency and vertical frequency green.
on the adjustment menu.
"POWER SAVE" for 5 seconds colour of the power
after which time the unit will turn indicator will turn to
into Power Saving Mode.
E
S
*
power saving requirements.
N E R G Y
TAR
Power
Power
Yes
98 W (typical)
Yes
Less than IO W
N o
N o
Less than 3 W
It is not failure.
monitors),
and
operating
It works when the monitor is connected to
orange.
be illuminated as a solid
green
The
Saving
States
Power
Indicator
Lighting Green
Lighting Orange
system
manufacturers
The Table l-3
Power
Indicator
State
colour.
,

Advertisement

loading

  Also See for Hitachi CM771ET

  Related Manuals for Hitachi CM771ET

This manual is also suitable for:

Cm772etCm771euCm772euCm771et/uCm772et/u