Connecting To A Pictbridge Compliant Printer - Hitachi HDC-1051E Instruction Manual

CONNECTING TO A PICTBRIDGE COMPLIANT PRINTER

If a printer that supports PictBridge is available, images can be printed by connecting the digital still
camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your camera.
2. Connect the other end of the USB cable to the USB port on the printer.
3. Turn on your camera.
4. The [USB] screen is displayed. Select [PRINTER] with the
buttons, and press the SET button.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge menu is
displayed on the monitor.
1. Select the item you want to configure with the
press the SET button.
[Images]: Select whether you want to print specific image or
all images. You may also select printing number for
specific image.
[Date Print]: According to the printer type, select whether you want to
print the image with date imprint or not.
[Paper Size]: Select the desired paper size according to the printer
type. You can select [Default], [L], [2L], [Postcard], [8''*10'']
or [A4].
[Layout]: Select the desired printing layout according to the
printer type. You can select [Default], [1 up], [2 up], [4
up], [Borderless] or [Print Index].
[Print]: After all settings are configured, select this item to
start printing.
2. If you select [Images] in the previous step, the figure shown on the
right hand side will appear. Select [Single] or [All] with the
buttons, and press the SET button.
[Single]:Select to print one specific image.
[All]: Select to print all images.
[Exit]: Exit from Images option.
/
/ buttons, and
/
EN-79