Av] Aperture Priority Mode - Hitachi HDC-1051E Instruction Manual

[Av] Aperture Priority Mode

In this mode, images are captured with the priority given to aperture. The shutter speed is automatically
set according to the aperture. The aperture will affect the depth-of-field of the camera.
If you set a small aperture (higher F value), both close objects and distant objects will be in focus, for
example when capturing landscape images. Alternatively, if you set a large aperture (lower F value), you
can capture portrait images with an out-of-focus background.
1. Slide the mode switch to [
2. Adjust the aperture with the
Press the button to increase the value.
Press the button to decrease the value.
The setting range of the aperture value is as follows:
F6.7, F5.6, F4.8, F4.0, F3.5, F2.8 (Wide).
F4.8, F5.6, F6.7, F8.0, F9.5, F11.0 (Tele).
The aperture value and corresponding shutter speed are
displayed on the screen. If an appropriate combination cannot
be set, the shutter speed is displayed in red, but images can
be captured regardless.
3. Compose the image, press the shutter button down halfway,
and then press it down fully.
The aperture value varies depending on the position of the zoom lens.
] and set the mode dial to [Av].
/ buttons.
EN-43