Setting The Flash - Hitachi HDC-1051E Instruction Manual

Setting the Flash

Set the flash for capturing images. The flash firing mode can be set to suit for the photographic conditions.
1. Slide the mode switch to [
2. Toggle the button to select the desired flash mode.
The table below will help you choose the appropriate flash mode:
Flash mode
[ Blank] Automatic Flash
[ ] Red-eye Reduction
[ ] Forced Flash
[ ] Flash Off
EN-34
].
Description
The flash fires automatically to suit the photographic conditions.
This mode is only available when the camera is set to the [
[ ]
mode.
Use this mode to reduce the red-eye phenomenon when you want to
capture natural- looking images of people and animals in low-light conditions.
When the camera mode is [
brightness of the subject.
When the camera mode is [Tv] and [Av], the flash will always fire.
In this mode, the flash always fires. Use this mode for photographing under
artificial light such as backlighting, fluorescent lighting, etc.
Use this mode when capturing images using indoor lighting, for stages and
indoor competitions, and when the subject is too far away for the flash to be
effective.
], [P] and [M], the flash will fire to suit the
], [P], [ ] and