Hitachi HDC-1051E Instruction Manual page 81

3. If you select [Single] in the previous step, the figure shown on the
right hand side will appear.
Select the image that you want to print with the
Select the [Print Num.] (up to 99) with the
After selecting the desired image and printing number, press the
SET button to confirm.
4. Select [Exit] with the
5. Select [Print] with the
start printing.
6. The printing starts and the figure shown on the right hand side
appears.
The [Complete] will be displayed temporarily, reminding you that
the printing procedure is finished.
If a print error is detected, the [Print Error] will be displayed.
The image printing may be failed if the power to the camera is cut off.
We recommend that you use the AC power adapter when connecting the camera to the printer.
EN-80
/ buttons, and press the SET button.
/ buttons, and press the SET button to
/ buttons.
/ buttons.