Connecting To A Pictbridge Compatible Printer - Hitachi HDC-886E Instruction Manual

Connecting to a PictBridge Compatible Printer

Read this section if the model you purchased is included with the PictBridge functions.
If a printer that supports PictBridge is available, images can be printed by connecting the digital
still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your camera.
2. Connect the other end of the USB cable to the USB port on the printer.
3. Turn on your camera.
4. Select [Printer] with the
Printing images
When the camera is properly connected to a PictBridge compliant printer and set to [Printer],
the PictBridge menu is displayed on the monitor.
1. Select the item you want to configure with the
buttons, and press the SCN/SET button.
[Images]: Select whether you want to print specific
image or all images. You may also select printing
number for specific image.
[Date Print]: According to the printer type, select
whether you want to print the image with date
imprint or not.
[Paper Size]:
according to the printer type.
[Layout]: Select the desired printing layout according to the printer type.
[Print]: After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the figure
shown on the right hand side will appear. Select
[Single], [All], [DPOF] with the
the SCN/SET button.
3. If you select [Single] in the previous step, the figure
shown on the right hand side will appear.
Select the image that you want to print with the
buttons.
Select the [Print Num] (up to 99) with the
buttons.
After selecting the desired image and printing number,
press the SCN/SET button to confirm.
4. Select [Print] with the
SCN/SET button to start printing.
The [COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is finished.
If a print error is detected, the [PRINT ERROR] will
be displayed.
The image printing may be failed if the power to the camera is cut off.
/ buttons, and press the SCN/SET button.
Select the desired paper size
/ buttons, and press
/ buttons, and press the
/
PictBridge
/
/
Single
Print Num
00
100-0001
SET:Enter
SET:Enter
EN-25