Photography Mode; Auto Mode - Hitachi HDC-1051E Instruction Manual

PHOTOGRAPHY MODE

[

] Auto Mode

Auto photography mode is the most commonly used photography mode. Images can be captured simply
because the exposure (the combination of shutter speed and aperture setting) is determined automatically
to suit the photographic conditions.
Your camera is equipped with a 2.8" TFT color LCD monitor to help you compose images, playback
recorded images/movie clips or adjust menu settings.
1. Press the POWER button to turn on the camera.
2. Slide the mode switch to [
3. Compose your image in the LCD monitor.
4. Press the shutter button down halfway.
Pressing the shutter button down halfway automatically
focuses and adjusts the exposure.
The focus-area frame turns blue and the status LED lights
green when the camera is focused and exposure is
determined.
When the focus or exposure is not suitable, the frame of the
focus area turns yellow and the status LED flashes red.
5. Press the shutter button down fully to capture the image.
If the photographic preview is set to "On", images (the captured
image) will be displayed while the image is being recorded
onto the memory.
When the [ Dub ] is set to "On", [VOICE RECORDING] will be
displayed on the screen immediately after the image is
captured and voice memo recording will start.
Press the shutter button one more time during recording, or
wait for 30 seconds, [VOICE RECORD END] will be displayed
and the recording will end. A [
images that have been recorded with a voice memo.
EN-30
] and set the mode dial to [
] icon is displayed with
].
Press down halfway
1
Press down fully
2