Protecting Images - Hitachi HDC-1051E Instruction Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [
2. Select the image that you want to protect with the
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the
5. Select [Single] or [All] with the
SET button.
6. Select [Set] with the
Protection is applied to the image and the camera returns to
the playback mode.
The protect icon [
When [All] has been selected, [
].
/ buttons, and press the SET button.
/ buttons, and press the
/ buttons, and press the SET button.
] is displayed with protected images.
] is displayed with all the images.
/ buttons.
2
2
EN-57