Setting The Date And Time - Hitachi HDC-1051E Instruction Manual

Setting the Date and Time

The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the
correct date and time.
1. Slide the mode switch to [
2. Select [Setup2] with the
3. Select [Date/Time] with the
button.
The Date/Time setting screen will be displayed:[Setup]
[Format], [On/Off].
4. Select [Setup] with
Select the item's field with the
value for the date and time with the
The date and time is displayed as the format you set.
The time is displayed in 24-hour format.
After confirming all settings are correct, press the SET button.
The setting will be stored and the screen will return to the
Setup2 menu.
EN-24
], and press the MENU button.
button.
/ buttons, and press the SET
/ buttons,and press the SET button.
/ buttons and adjust the
/ buttons.