Turning The Power On/Off - Hitachi HDC-1051E Instruction Manual

Turning the Power On/Off

1. Load the battery or connect the AC power adapter to your
camera.
2. Press the POWER button to turn on your camera.
The status LED lights green and the camera is initiated.
The power indicator lights on when the camera power is turned
on.
When the power is turned on, the camera will start in the
mode that is currently selected.
3. To turn off your camera, press the POWER button again.
The power is turned off automatically when the camera has not been operated for a defined period
of time. To resume the operation condition, turn the power on again. Refer to section in this
manual titled "Auto OFF" in the Setup1 Menu for further details.
When the power is turned on, it may take several seconds to charge the flash. While the flash is
being charged, the status LED lights orange.
The camera is not ready until the flash has charged. The camera is ready when the status LED
is off.
EN-23