User Setting Mode; Video Mode - Hitachi HDC-1051E Instruction Manual

[

] User Setting Mode

This mode allows you manually set the setting parameters and all these settings will be memorized.
1. Slide the mode switch to [
2. Compose the image, press the shutter button down halfway,
then press it down fully.
[

] Video Mode

This mode allows you to record video clips at a resolution of 640 x 480 pixels. Voice can also be
recorded.
1. Slide the mode switch to [
2. Compose the scene with the zoom button.
Optical and digital zoom can be used while composing the
scene.
3. Fully press down the shutter button.
The recording of the video clip will start.
Pressing the shutter button again will end the recording.
The recording time depends on the storage size and the subject of the image to be recorded.
Zoom function cannot be used during video recording.
When recording video clips, the flash cannot be used.
If the access speed of your SD memory card is not enough for recording video clips in the
currently selected quality, a warning icon [
In this case, select a video quality lower than the current one.
] and set the mode dial to [
] and set the mode dial to [
].
].
] will appear, and then the movie recording will stop.
EN-45