Connecting To A Pictbridge Compliant Printer - Hitachi HDC-881E Instruction Manual

Connecting to a PictBridge Compliant Printer

Read this section if the model you purchased is included with the PictBridge functions.
If a printer that supports PictBridge is available, images can be printed by connecting the
digital still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your
camera.
2. Connect the other end of the USB cable to the
USB port on the printer.
3. Select [Printer] with the
the OK button.
Printing images
When the camera is properly connected to a PictBridge compliant printer and set to
[Printer], the PictBridge menu is displayed on the monitor.
1. Select the item you want to configure with the
/ buttons, and press the OK button.
[Images]: Select whether you want to print
specific image or all images. You may also
select printing number for specific image.
[Size]: Select the desired paper size
according to the printer type.
[Layout]: Select the desired printing layout
according to the printer type.
[Date Print]:According to the printer type, select whether you want to print the
image with date imprint or not.
[Print]: After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the
figure shown on the right hand side will appear.
Select [Select], [All] with the
press the OK button.
[Select]: Select to print one specific image.
[All]: Select to print all images.
/ buttons, and press
/ buttons, and
USB
PC
Next Menu
Printer
PC Cam
PictBridge
Next Menu
Images
Size Default
Layout
Default
Date Print
Default
Print
Images
Select Next Menu
All
Next Menu
Set: OK Set: OK Set: OK
Set: OK Set: OK Set: OK
Set: OK Set: OK Set: OK
EN-39