Protecting Images - Hitachi HDC-887E Instruction Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
[ ]
1. Press the button.
2. Select the image that you want to protect with the
3. Press the button.
4. Select [Protect] with the
button.
5. Select [Single] or [All] with the
the button.
6. Select [Set] with the
button.
Protection is applied to the image and the camera
returns to the playback mode.
The protect icon
When [All] has been selected,
with all the images.
Canceling the Protection
To cancel protection for only one image, display the image on which
you want to remove the image protection.
1. Select [Protect] with the
menu, and press the
2. Select [Single] or [All] with the
the button.
3. Select [Cancel Protect] with the
the button.
The removal of image protection is executed and the
camera returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the
2. Select [Select] with the
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the
The protect icon
button will cancel the operation. This procedure is repeated to select multiple images.
4. Press the button.
5. Select [Execute] with the
Protection is executed and the camera returns to playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
EN-24
/ buttons, and press the
/ buttons, and press
/ buttons, and press the
is displayed with protected images.
[ ]
is displayed
[ ]
/ buttons from the playback
button.
/ buttons, and press
/ buttons, and press
/ buttons from the playback menu, and press the
/ buttons, and press the
is displayed with protected images. One more press of the
[ ]
/ buttons, and press the
/ buttons.
button.
/ buttons, and press the
button.
button.
button.