Protecting Images - Hitachi HDC-1097E Instruction Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
1. Press the button.
2. Select the image that you want to protect with the
buttons.
3. Press the
4. Select [Protect] with the
button.
5. Select [Single] or [All] with the
press button.
6. Select [Set] with the
button.
Protection is applied to the image and the camera
returns to the playback mode.
The protect icon [ ] is displayed with protected
images.
When [All] has been selected, [ ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Select [Protect] with the
playback menu, and press the
2. Select [Single] or [All] with the
3. Select [Cancel Protect] with the
The removal of image protection is executed and the camera returns to the
playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
EN-24
button.
/ buttons, and press the
/ buttons, and press the
/
/
/
/ buttons, and
buttons from the
button.
buttons, and press the
/ buttons, and press the
button.
button.