Table of Contents
Advertisement
FM Operation
Switching to FM Mode
Make sure the unit is in POWER ON mode. Press the DAB/FM/AUX button repeatedly to
select FM mode. The display will show FM and the frequency.
Auto Scan
To search for an FM station automatically, press the PLAY/PAUSE/SCAN
the auto scan forward. Once a station has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, press repeatedly or press and hold the SKIP/TUNE
SEARCH
buttons until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by pressing the SKIP/TUNE
SEARCH
buttons repeatedly. Each press will adjust the frequency by 0.05MHz. If
reception is still poor adjust the position of the aerial or try moving the radio to another
location.
Audio Mode
Press the SELECT/MONO/ST. button to toggle between the Auto or Mono selection.
The unit will automatically switch between stereo and mono in Auto mode depending on the
station, but you can override this and switch this function manually set to Mono mode. This is
helpful when receiving poor signal reception.
Storing Stations
You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1.
To store a preset, you must first be listening to the station that you would like to save.
Press and hold the ID3/iPod/MEM/C-ADJ. button. The "Preset Empty #" will show on
the display and the preset number will flash.
Press the SKIP/TUNE SEARCH
2.
number and then press the ID3/iPod/MEM/C-ADJ. button to confirm.
3.
The station will be stored and the screen will then show "Preset # Stored".
There are some preset stations in default setting. You can overwrite
them anytime you want.
buttons to select your desired preset station
button to start
21
GB
Advertisement
Table of Contents
