Fm Operation; Tuning In A Station; Auto Tuning; Manual Tuning - Hitachi AXM139E Instruction Manual

FM Operation

You can listen to FM stations. Stations can be tuned in manually, automatically, or from
preset memory storage.
Before listening to the radio, please check that the FM antenna is correctly connected and
adjusted for length and direction.

Tuning in a Station

Repeatedly rotate the SOURCE dial on the amplifier or FM/DAB on the remote control to
select TUNER mode.

Auto Tuning

Press the SCAN button on the remote control to start an auto tuning. The display will show
[AUTO] and the auto tuning will start.

Manual Tuning

/
Press the buttons on the main unit or
manual tuning.

Preset Tuning (Available only after the stations are preset)

Repeatedly press the PRESET
buttons on the main unit to select the desired preset number. Its band and frequency are
displayed on the Display panel.

Presetting Stations

You can manually preset up to 20 FM stations.
Tune in the desired station:
Press the PROGRAM button on the remote control, the preset number will be displayed.
1.
Press the ALBUM/PRESET
2.
buttons on the main unit to select the preset number.
If you select more than 20, the preset number will be changed to "1" automatically.
Press the PROGRAM button again to store the station. The display will return to the
3.
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset
number.
If the system is unplugged or if a power failure occurs, the preset stations will not be erased after stored.
/
buttons on the remote control for
/
buttons on the remote control or press the
/
buttons on the remote control or press the
GB
/
/
25