NEC Unified Solutions, Inc.
Switching Between the Desktop Multiline Telephone and the
Cordless Telephone Using the Base Unit
When the D
following is applicable:
Use the base unit on the D
Cordless II and the multiline telephone.
To perform switching:
Press Cordless to select the D
- OR -
Press Desk to select the Multiline Telephone. (Refer to
and Desk Buttons
term ™
D
Cordless II Owner's Guide
term
Cordless II is associated with a multiline telephone the
Switching between cordless and desk mode must be done while both
telephones are idle.
A call in progress cannot be switched between the D
and the associated
Switching held calls between the D
multiline telephone
is not recommended since line key LED indications
will not be provided.
.)
term
The D
display indicates DESK TEL when the multiline telephone is
connected.
Figure 4-2 Cordless and Desk Buttons
.
multiline telephone
term
term
Cordless II to switch between the D
term
Cordless II.
Document Revision 3
term
Cordless II and the associated
Figure 4-2 Cordless
Cordless II
term
4 - 5