Switching Between The Desktop Multiline Telephone And The Cordless Telephone Using The Base Unit - NEC Dterm Cordless Lite II Owner's Manual

NEC Unified Solutions, Inc.
Switching Between the Desktop Multiline Telephone and the
Cordless Telephone Using the Base Unit
When the D
following is applicable:
Use the base unit on the D
Cordless Lite II and the multiline telephone.
To perform switching:
Press Cordless to select the D
- OR -
Press Desk to select the Multiline Telephone. (Refer to
and Desk
term
D Cordless Lite II Owner's Guide
term
Cordless Lite II is associated with a multiline telephone the
Switching between cordless and desk mode must be done while both
telephones are idle.
A call in progress cannot be switched between the D
Lite II and the associated
Switching held calls between the D
associated
multiline telephone
indications will not be provided.
Buttons.)
term
The D display indicates DESK TEL when the multiline telephone is
connected.
DESK
DESK LED
Figure 4-2 Cordless and Desk Buttons
multiline telephone
term
is not recommended since line key LED
term
Cordless Lite II to switch between the D
term
Cordless Lite II.
POWER
Document Revision 2
term
Cordless
.
Cordless Lite II and the
Figure 4-2 Cordless
CORDLESS
CORDLESS
LED
term
4 - 5