Volume Low; Dialing; No Service - NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual

Document Revision 3

Volume Low

When connection is established, the TALK icon is
turned on and displays the current volume settings
for two seconds. If the host system sends any
messages at this time, the volume display is
canceled.

Dialing

When the handset displays this message, it is
prompting the user to enter the numbers to be
dialed.

No Service

When the handset cannot connect to the base unit,
an error tone is emitted and NO SERVICE is
displayed for two seconds on the handset LCD.
The handset then goes into standby mode. When
the NO SERVICE indication is received, take one
the following actions described in
Service Conditions
condition.
4 - 8
to resolve the NO SERVICE
Table 4-3 No Service Conditions
Warning Tone
Condition
Move back in range within
20 seconds.
Action
Check power to the base
unit.
Table 4-3 No
During a Call
NEC Unified Solutions, Inc.
In Standby Mode
Cannot make or answer calls
(telephone may ring
intermittently).
Move back within range.
Check power to the base unit.
term
D Cordless II Handset