Figure 3-1 Connecting Telephone Cords To The Telephone Jack - NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual

Document Revision 3
To connect the telephone cords:
1.
2.
3 - 2
Never touch bare telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Connect the cord from the telephone jack to the Line In on the D
Cordless II.

Figure 3-1 Connecting Telephone Cords to the Telephone Jack

Connect a qualified NEC digital Multiline Terminal to the D
II.
Line "OUT"
Figure 3-2 Connecting the D
NEC Unified Solutions, Inc.
Electra Elite or
term
D
Multiline Telephone
term
Cordless II to the Multiline Terminal
Installing the D
term
To digital Multiline
Telephone
interface card on
KTS/PBX
term
Cordless
Series E
term
Cordless II