SPECIAL CHARACTERISTICS
Linear time counter
1
2
3
DISP
4
5
6
7
8
9
0
0000
Automatic rewind
Rewind shut off
Rental Play
hour
minute
second
Press the DISP button twice to select the linear
time counter display. Every time the button is
pressed, it changes the VCR's display between the
clock time display and time counter display.
• The counter is reset to 0:00:00 when a tape is
ejected.
• When the tape starts, it counts up from 0:00:00
and the counter indicates the elapsed time.
• Pressing the 0000 button resets the time counter
to "0:00:00".
Notes:
• The linear time counter does not operate when
nothing is recorded on the tape.
• The counter may not be able to count the time
precisely with some types of tape and at
particular positions of the tape.
The VCR automatically rewinds the tape when the
end of tape is reached.
To prevent accidental erasure, the VCR does not
rewind the tape after timer recording.
If the OPERATE button is pressed during the
rewind operation, the VCR will be turned off
automatically after the tape has been completely
rewound.
The VCR will automatically start playback when a
cassette with its safety tab removed is inserted
into the VCR.
Then the VCR will enter the rewind mode when
the tape reaches its end or when the VCR plays the
non-recorded section for approximately 30
seconds, and then VCR will eject the cassette at
the beginning of tape and turn the power off.
39